Petrarca
6142/2F - 6145/2F
The instruction manual is downloadable from the site www.vimar.com
Description
Items 6142/2F and 6145/2F are respectively a desktop base and a wall-mounting bracket.
Both items use a circuit board which enables the activation of a Petrarca monitor type 6029 (6029/C).
Use with monitor 6029 and 6029/C
To associate a Two-Wire monitor type 6029 or 6029/C with a telephone extension it is necessary to use type 6145/2F or
6142/2F. The latter has a DIP-switch which must be set based on the extension number according to the following table
ON
1 2
3
ON
1 2
3
ON
1 2
3
ON
1 2
3
If the Elvox Two-Wire system contains a separator 692S, monitor activation cards type 6145/2F or 6142/2F cannot be
separated from the switchboard by means of a separator: if the telephone switchboard is connected on the main bus, all
of the monitor activation cards must also be connected on the main bus. If the telephone switchboard is connected on
the secondary bus of a separator, all of the monitor activation cards must also be connected on the same secondary bus.
If simultaneous activation of multiple monitors 6029 or 6029/C is required, for example with a group call to multiple
extensions, it is necessary to use additional power supply units for cards type 6145/2F or 6142/2F, starting from the
second simultaneously activated monitor.
VIMAR group
Telephone
Derivato 41
extension
Telephone
Derivato 42
extension
Telephone
Derivato 43
extension
Telephone
Derivato 44
extension
ON
1 2
3
ON
1 2
3
ON
1 2
3
ON
1 2
3
EN
Telephone
Derivato 45
extension
Telephone
Derivato 46
extension
Telephone
Derivato 47
extension
Telephone
Derivato 48
extension
3