Auto-Iq Nutri Ninja Guia Del Propietario página 9

Fig. 1
6
Turn the cup upside down and place it onto the motor base, aligning the tabs
on the cup with the motor base.Turn it clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 2)
7
Follow the operation instructions from the main instruction manual of the base
being used. Press one of the appropriate buttons to start. (Fig. 3)
CAUTION: DO NOT BLEND MORE THAN 3 CONTINUOUS CYCLES TO AVOID
CONTENTS GETTING HOT.
WARNING: UNIT WILL STOP AFTER 3 CONTINUOUS CYCLES. UNPLUG
THE BASE. REMOVE THE CUP. ENSURE THAT THE CONTENTS ARE NOT
HOT. REPLACE THE CUP ONTO THE MOTOR BASE. PLUG THE MOTOR
BASE BACK IN.
8
To remove the cup, ensure that the motor has stopped running. Then turn the
cup counter clockwise (Fig. 4) and pull straight up to remove. (Fig. 5)
9
Turn the cup upright and remove the blade assembly by twisting the blade
assembly counter clockwise. Be sure to store the blade assembly attached to
an empty cup when not in use.
10 Twist the Sip & Seal
top cap firmly into the opening to get the best seal. The flip top cap locks open
when pressed backward.
11 Make sure that the motor base is unplugged when not in use.
Fig. 2
Fig. 4
lid onto the cup to enjoy your drink on the go. Press flip
®
Fig. 3
Fig. 5
www.NutriNinjaAutoIQ.com
EN
8