Use; Main Functions - Saba CAF ARIELA CI Manual Del Usuario

Use

indicator
indicator

1. Main functions

GB
(1). Two operating modes: delayed heating (0-24 hrs) or immediate heating.
(2). A
2. Button functions
(1). butt
.
(2). button (timer): Set the time for the appliance to turn on; cancel and reset to zero .
(3). button: Adjusts the time, used in combination with the H and MIN buttons; in all modes,
holding this button down will display the time.
(4). H button: Each press of this button advances one hour. Hold the button down to cycle
through the numbers faster.
(5). MIN button: Each press of this button advances one minute. Hold the button down to cycle
through the numbers faster.
56
delay
set
hour
minute
work
delay
.
3. Modes of operation
(1). A
(i.e.
(2). Standby mode: the screen displays the time, and the numbers advance as normal on digital
clocks.
(3). Set delay: set to the desired start-up time using the H and MIN buttons (holding
the same time). Release the buttons once you have reached the desired time.
.
Before setting the delay time, the screen will display 00:00 when you press the
button, and the appliance is not in heating or delay mode.
(4). Delay: The screen displays the time, like a digital clock, and the
(5). Heating: The screen displays the time, like a digital clock. The red LED stays on and the
appliance heats up.
4. Use
(1). A
stays solid). Set the time using the H/MIN buttons. If you press the
setting the time, the clock will stay on 00:00, the appliance heats up continuously and the
red LED stays lit.
the appliance is not in heating or delay mode.
(2). Setting the time: When the appliance is switched on or in standby, set the time using the
H and MIN buttons. Once you have set the clock, the time will display and the numbers will
up).
(3). Adjusting the delay time: set to the desired start-up time using the H and MIN buttons
(holding down at the same time).
(4). O
follows:
a. Press the button to go straight to heating mode, the red LED lights up and the
delay function cannot be used.
b. Press the button to go to delay mode, the blue LED lights up and the delay
.
c. Release the butt
.
down at
indicator is lit blue .
button before
GB
. Proceed as
.
57