Preparation For Using The Unit; Resetting; Contrast Adjustment; Demo Function - Seiko TR2250 Manual De Operación

Preparation for using the Unit

1.Resetting

1. Before using the unit, press the RESET button on the
front of the unit.
Since some pens and pencils are too thick, a paper
clip is suggested for pressing the RESET button.
2. The message "Clear Databank Memory ?" will
appear.
Press or (Yes).
ENTER Y
(Please see page 59 for details.)
After resetting, the contrast adjustment display will
appear.
Clear Databank Memory?
No Yes
8

2.Contrast Adjustment

1. You can use either or (
) to adjust the contrast of the display.
2. Press to finish.
ENTER
A demonstration display will appear.
* If you want to adjust the contrast of the display again,
see "Setting function (page 52)".

3.Demo Function

A demonstration display will begin to explain the
contents of the unit.
* You can stop the demonstration by pressing any of
the keys.
* If you want to disable the demo function, see
"Setting function (page 52)".
or
Welcome to the
SEIKO English/Spanish
Translator.
9