Installation Steps - AirLive ARM-204 Guía De Configuración Rápida

Installation Steps

1. Please install your network cards first before the Router
2. Connect the power, LAN cable and ADSL cable to the back
3. If you need to change router configuration, please follow the
procedure below:
The Router default IP address is 192.168.2.1. Please make
sure your computer IP is in the same subnet as the Router (i.e.
192.168.2.x)
Open the web browser and enter 192.168.2.1. When asked
for Login and Password, just type admin for loginname and
airlive for Password.
Auto Setup Wizard
Interenet: Basic Setting
This setup wizard can be run in Win 98SE/Me/2000/XP. Please make sure
that you have connect your PC to the LAN port of the ADSL router, the
ADSL line is connected to the router before using the Setup Wizard.
1. Please insert the driver CD that came with your device into your
CD-ROM drive, the driver CD will auto start and show the installation
guide. If not, please double click the CD-ROM device icon in "My
computer", and execute the Run.exe.The following screen will be
displayed. Click "Setup Wizard".
Wired ADSL 2/2+ Router
English
2
2