lbx R20 Serie Manual De Usuario página 4

Operation
Operating procedure
1. The diagram of the pump system is shown as above.
2. Once all tubes have been connected to Inlet (1) Outlet (2) properly then activate the pumping
function by pressing (3) on/off button.
3. To adjust vacuum of the pump, an optional vacuum regulator/ moisture trap is needed.
Warning: When pump is used in water filtration, please do not make the liquid level of flask exceed
safety level. Failure to comply could result in serious damage to the pump and void the warranty. If
it occurs, please contact the distributor immediately for service.
Setup moisture trap (Option)
Moisture trap (Vacuum regulator) is an optional item that is used to adjust vacuum and absorb
moisture and particle.
The flow chart of installing vacuum regulator/moisture trap
Warranty
This instrument is warranted to be free from defects in materials and workmanship under normal
use and service, for a period of 48 months from the date of invoice. The warranty is extended only
to the original purchaser. It shall not apply to any product or parts which have been damaged on
account of improper installation, improper connections, misuse, accident or abnormal conditions of
operation.
For claim under the warranty please contact your supplier.
Remove the Teflon tier connector at side
of cylinder head with a spanner.
Fix the moisture trap at the location of
the Teflon tier connector removed from
Step 1.
Fix the glass bottle. Finished
4