Bühler technologies Nivotemp NT M-L Manual Del Usuario página 5

Nivotemp NT M-L
5 Operation and control
NOTICE
The device must not be operated beyond its specifications.
Version with IO-Link interface
This unit is equipped with an IO-Link interface, which require
an IO-Link master.
The IO-Link interface allows direct access to process and dia-
gnostics data, and allows configuring the unit during opera-
tion.
The IODDs required to configure the unit is available at ht-
tps://ioddfinder.io-link.com/.
If the IO-Link interface is not being used (no master or only
used to parametrise), the level- and temperature sensor func-
tions as a regular level- and temperature sensor with 2
switching outputs. The default parameters and switching
function of the switching outputs, however, can be paramet-
rised via IO-Link master.
For more information please visit: www.io-link.com
6 Maintenance
Always observe the applicable safety- and operating regula-
tions when performing any type of maintenance. Please refer
to the original operator's manual on the included CD or online
at www.buehler-technologies.com for maintenance informa-
tion.
7 Service and Repair
Please refer to the original operator's manual on the included
CD or online at www.buehler-technologies.com for a detailed
description of the unit including information on
troubleshooting and repair.
BX100029 ◦ 08/2020 Bühler Technologies GmbH 5