HAMPTON BAY 28556 Manual Del Usario página 4

Installation - Ceiling Fan Light Kit
1
Preparing the fan
□
Remove the ceiling fan switch cup cover (E) from the ceiling
fan assembly by removing the three mounting screws (EE).
□
Remove the center plug (DD) from the switch cup cover (E).
3
Wiring the light kit to the fan
□
Locate the blue and white wires inside the ceiling fan
switch cup (D) for light connection.
□
Connect the blue wire form the ceiling fan switch cup to the
black wire from the light kit (A).
□
Connect the white wire from the ceiling fan switch cup
to the white wire from the light kit (A) by connecting the
molded plugs together.
□
Reattach the switch cup cover (E) to the ceiling fan switch
cup (D) and secure with the screws (EE) that were removed
in step 1.
EE
E
DD
2
Preparing the light kit
□
Insert the black wire and white wire from the light kit
through the center hole of the ceiling fan switch cup
cover (E).
□
Thread the ceiling fan switch cup cover (E) onto the
threaded nipple (FF) on the top of the light kit (A).
□
Take out the lockwasher (BB) and hex nut (AA) from
the hardware pack. Inert the black wire and white wire
through the lockwasher (BB) and hex nut (AA), tighten
them securely.
E
EE
4
AA
BB
FF
A
D
E
A