Publicidad
SPORT-BRELLA BEACH CHAIR ASSEMBLY
1
BASE HINGE
SIDE HOLDER
2
STATIONARY
COLLAR
TOP HINGE
BUTTON
3
TAB
PRESS TAB TO
PULL OUT UMBRELLA
4
1
OPEN THE CHAIR AND UMBRELLA
1. Pull the chair out of the bag and open it fully.
2. The umbrella will be attached to the side of the
chair. To open, press and hold the button at the
base hinge of the umbrella. Rotate the umbrella
180 degrees. Release the button and click the
umbrella into place.
NOTE: If umbrella is not attached, simply slide it
into the black plastic holder on either side of the
chair, button facing outward.
3. Once in place, detach the ties around the
umbrella, push the umbrella up and open. Your
Sport-Brella Beach Chair is now ready for use.
TOP HINGE AND ROTATING THE CANOPY
1. To adjust the umbrella forward or backward 180
degrees, press the top hinge button. Move
umbrella into place, and release to lock.
2. To rotate the canopy, grab the canopy tip and
rotate the canopy to desired position. The
canopy shaft will rotate in the stationary collar.
NOTE: Do not attempt to twist the
stationary collar.
MOVING UMBRELLA TO EITHER SIDE
1. To move the umbrella to the other side
holder of the chair, press tab and pull out the
umbrella shaft from the side holder. Place
umbrella in the other side holder until it
clicks into place.
ADJUSTING BASE HINGE
1. The umbrella can be adjusted forward and
backward by pressing the base hinge button,
moving the umbrella arm and releasing the
button to lock it in place.
3
STORE YOUR SPORT-BRELLA
BEACH CHAIR
Make sure that the chair and umbrella are dry
and free of debris before storing.
1. Straighten the umbrella pole with the top
hinge. Close the umbrella and secure with
the velcro ties.
2. Press and hold the base hinge button.
Rotate the
umbrella downward until it is parallel with the
back chair leg.
3. Fold the chair, footrest and umbrella
together. Slide contents into the carry bag.
Publicidad
