Work WCR 35 Manual De Usuario página 12

SPECIFICATIONS
INPUTS
Type
Filter
Input GAIN control
Input Impedance
Nominal Operating Level
Maximum lnput Level
CMR
OUTPUTS
Type
Output lmpedance
Maximum Output Level
Bandwidth
THD
IMD (SMPTE) @ +10 dBu
Noise & Hum, unity gain
Crosstalk @ 20 kHz
FILTER
Type
MODE switch
RANGE switch
X'OVER FREQ. control
LF GAIN control
MF GAIN control
HF GAIN control
LF/MF/HF MUTE switches
FUNCTIONS
MONO BASS switch
MODE switch
INDICATORS
SWITCH LED indicators
MODE LED indicators
POWER SUPPLY
Mains Voltages
Power Consumption
Fuse
Mains Connection
PHYSICAL
Dimension
Net Weight
Shipping Weight
Page 10
Servo-balanced input
RF& 15 Hz highpass filter on each input
Variable -12 to +12 dB
60 kohms, balanced
-10 dBv to +4 dBu
+20 dBu balanced and unbalanced (unity gain)
Better than 40 dB
Electronically servo-balanced output stage
40 ohms, balanced and unbalanced
+26 dBu balanced +21 dBu unbalanced
16Hz to 40 kHz, +0, -1 dB
0.005% typ.
0.01% typ.
-92 dBu (20 Hz to 22 kHz, unweighted )
Better than 50 dBu
State variable 24 dB/octave Linkwitz-Riley filter
Stereo 3-way or mono 5-way selectable
Switchable 80 to 900 Hz / 800 Hz to 9 kHz
Variable 80 to 900 Hz / 800 Hz to 9 kHz
Variable - to 0 dB
Variable - to 0 dB
Variable - to 0 dB
Outputs can be switched off
In stereo mode both bass outputs can be summed
Select s tereo 3-way or mono 5-way
All active switches are illuminated
Highlight the active controls in 2-way or 3-way mode
100-120/200-240 VAC 50-60 Hz
10 watts
250 mA (100-120v); 125 mA (200-240v) slow-blow
Standard IEC receptacle
1 3/4"(44mm) x 19"(483mm) x 28 3/4"(155mm)
3.3kg (7.29 lbs)
4.3kg (9.51 lbs)
Reference Manual