POLARIZED PLUGS—To reduce the risk of electric shock, this
equipment has a polarized plug (one blade is wider than the
other). This equipment must be used with a suitable polarized 2
wire or 3 wire extension cord. Polarized connections will fit
together only one way. Make sure that the receptacle end of the
extension cord has large and small blade slot widths. If the plug
does not fit fully into the extension cord, reverse the plug. If it
still does not fit obtain a suitable extension cord. If the
extension cord does not fit fully into the outlet, contact a
qualified electrician to install the proper outlet. Do not change
the tool plug or extension cord in any way.
CHECK DAMAGED PARTS – Before further use of the tools, a
guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting and any
other condition that may affect its operation. A guard or other
part that is damaged should be properly repaired or replaced.
Call our customer service help line at 1-800-313-5111 for
assistance.
Input..................................................................................................................................... 120V, 60Hz, 6.5A, AC Only
Speed ...............................................................................................................................................................11m/s
Bar Length......................................................................................................................................................8 in. Bar
Extended Length............................................................ ..................................................................................9 ft. 3 in.
Weight .................................................................. .........................................................................................8.2 Ibs.
Telescopic Pole - Automatic Bar and Chain Oiling - Adjustable Cutting Head
Telescopic Pole
Rear Handle
PRODUCT SPECIFICATIONS
PS44008
Oil Cap
Angle Adjustment Button
Telescopic Pole
Shaft Coupling
Shaft Coupling
4
Model PS44008
WARNING: California Proposition 65: This product contains
chemicals known to the State of California to cause cancer,
birth defects or other reproductive harm.
WARNING: Some dust and debris created by this tool could
contain chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
-chemicals in fertilizers
-compounds in insecticides, herbicides and pesticides
-arsenic and chromium from chemically treated lumber
Your risk of exposure to these chemicals varies depending on
how often you do this type of work. To reduce your exposure,
work in a well ventilated area and with approved safety
equipment such as dust masks that are specially designed to
filter out microscopic particles.
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
CAUTION: Never stand under the limb being trimmed.
Position yourself out of the way of falling debris.
Bar
Cutting Head
Shaft Coupling
Shaft Coupling
Chain
Sprocket Cover