Main Menu; Tv Mode; Menu Language; Signal Type - QFX TV-LED1911 Manual De Instrucciones

● The unit contains different setting menus. Once the initial programming is entered, it will
be remain in the memory until change, and the unit can always be operated under the same
conditions.
● The settings will be remained in the memory until the settings are changed, even after
setting the player to standby mode.
Common procedure for initial settings
- Press MENU button on unit top or remote control to display the main menu.
- Press LEFT or RIGHT navigation button to select wanted item.
- Press ENTER or RIGHT navigation button to enter submenu page.
- Press UP or DOWN navigation button to select the option that want to adjust.
- Press LEFT or RIGHT navigation button to adjust selected option to desired value. Then
press ENTER button to confirm the selection.
- Press MENU button to return to previous menu page.
- Press EXIT button to exit menu page.

TV MODE

- Press SOURCE button on unit top or remote control to set the unit in TV mode. Then the
screen will display below menu page, if first time using:

Menu Language

●
- Press UP or DOWN navigation button to select Menu Language item.
- Press LEFT or RIGHT navigation button to select wanted language.

Signal Type

●
- Press UP or DOWN navigation button to select Signal Type item.
- Press LEFT or RIGHT navigation button to select wanted Signal Type.
Auto Channel Search
●
- Press UP or DOWN navigation button to select Auto Channel Search item.
- Press ENTER button to start channel searching.

MAIN MENU

18