Tripp-Lite SRCTMTCVR600 Guia De Instalacion página 3

Installation
1
Before proceeding with installation, make sure the SRCTMTFRM Frame Kit, SRCTMTTLBM
Beam Kit, SRCTMTSDD Sliding Double-Door Kit and SRCTMTRXXX Adapter Riser Panels
(if necessary) have been properly assembled.
Refer to the products' Installation Guides for more information.
2 With the help of an assistant, place the static roof panels onto the top of the containment
frame's upper support beams.
Secure the panel to the beam using the included screws.
Repeat for each additional panel.
Note: Leave screws loose and do not tighten until all panels are installed.
Self-Tapping
Screw (x4)
3
M6 x 12
M6 Washer
(x4)