Safety Instruction - multicomp pro PMB-2 Manual De Instrucciones

Set power price
Press and hold COST button more than 3 seconds, bottom part flashes the default price 0.00COST/KWH. Press FUNCTION
button to change digit. Press UP / DOWN button to set value. Press COST button to finish set.
Overload
Once loading more than 3680W, LCD middle part will flash OVERLOAD in any mode.
Reset
If LCD displays abnormally, or no response for pressing 4 main buttons, then press RESET button to reset product.
Display range
0 second - 9999 days, 0 - 9999W, 0 - 9999V, 0 - 9999A, 0 - 9999Hz.
0 - 99.99COST/KWh, 0 - 9999KWh, 0 - 9999COST, 0 - 1PF.
Specification
Max 13A, 230VAC, 2900W.

Safety instruction

Only for indoor using in dry -10°C to 40°C ambience.
Do not plug two or more products together in a row.
Do not open and do not repair this product by yourself.
Ensure appliance plug is fully inserted this product outlet.
Do not immerse this power meter socket in water or other liquid.
Connect appliance with correct loading as per above ticked specification.
Before clean this power meter socket, please remove this product from power, then wipe to clean by dry cloth.
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro
Page <3> 04/03/20 V1.0