Publicidad
Idiomas disponibles
Idiomas disponibles
Install the Fixture
1A
ELECTRICAL BOX
NEUTRAL WIRE
1
1
HOT WIRE
BLACK WIRE
7
MAX
100
120 volt
Use
Watt
Type A19 Medium Base Lamp.
1
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture to a suitable ground in accordance to local electrical codes.
2
3
Connect the white fixture wire to the neutral power line wire with a wire nut.
4
Connect the black fixture wire to the hot power line wire with a wire nut.
5
Align then place the fixture base onto the mounting plate studs and secure it with the two ball nuts.
6
Screw the lamp into the socket.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
7
MOUNTING
PLATE STUD
FIXTURE BASE
WHITE WIRE
1
3
5
2
4
MOUNTING
PLATE
MOUNTING
PLATE SCREW
BALL NUT
5
6
2
LAMP
Publicidad
