Cleaning, Care & Maintenance; Crumb Tray; Troubleshooting - Buffalo GF452 Manual De Instrucciones

UK
Cleaning, Care & Maintenance
• Always turn Off the appliance and disconnect from the power supply before
cleaning.
• Allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
• Take care when using scrapers to clean as they can damage the cooking surface.
• Dry thorougly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.

Crumb Tray

Periodically remove the crumb tray and empty.
WARNING: DO NOT remove the tray during or immediately after use as it will be hot.
Clean the crumb tray using warm, soapy water.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not working
Appliance does not reach set
temperature
Appliance heats up but indicator light
does not come on
Power indicator light comes on but
appliance does not heat up
Power indicator light comes on
but appliance does not heat up
Appliance slow to heat up
3
Probable Cause
The appliance is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Faulty thermostat
Faulty element
Bulb has expired
Faulty element
Faulty thermostat
Thermostat set incorrectly
Cooking surface not clean
Faulty element
Action
Check the appliance is plugged in correctly
and switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Clean cooking surface
Call BUFFALO agent or qualified
technician