Connecting To A Network - Arcam Solo Uno Manual De Instrucciones

All manuals and user guides at all-guides.com
SETUP
EN

Connecting to a Network

In order to use the audio streaming functions of the Solo Uno it needs to be connected to your local
network by either a wired or wireless network.
Connecting to a Wired Network
When setting up the Solo Uno using a wired connection, connect the Ethernet cable before the unit is
switched on. Power on the unit and allow the unit to boot up. Once a wired connection is established, the
NET LED will turn solid BLUE and the STATUS LED will turn PURPLE.
Connecting to a Wireless Network
When setting up the Solo Uno using a wireless connection, always wait for the unit to boot up. The
Solo Uno is ready when the Status LED turns RED and the NET LED starts flashing BLUE.
Connecting to Google Home
1. Download and open the Google Home app on a phone or tablet.
2. Connect your phone or tablet to the same network that you want the Solo Uno to be connected to.
3. Set up your Solo Uno in the Google Home app.
4. The Solo Uno is now set-up and ready for use.
Google Home
Connecting Wirelessly via AirPlay
5. Select the wireless network settings on your iOS device.
6. Go to the Wi-Fi settings on your mobile device and navigate to "SET UP NEW AIRPLAY SPEAKER... "
7. Select the speaker called "Solo Uno-XXXXXX" (where XXXXXX is a unique number assigned to the
Solo Uno).
8. Select the network you want the Solo Uno to connect to and press "Next".
9. Follow the on-screen instructions to complete the Solo Uno setup as an AirPlay speaker.
EN-7