Connecting To The Network - Ezviz Vault Guia De Inicio Rapido

Setup
Step 1
1

Connecting to the Network

Plug the network cable into the vault and then into a router as
shown in the following picture.
Vault does not support the Wi-Fi network connection.
2
Power-on
Plug the power cable into the vault and then into a power outlet.
The LED indicator will turn from solid amber to sold blue when it
is ready. This will take about 20 seconds.
Network Cable
1
WPS/
WAN LAN1 LAN2 LAN3 LAN4
POWER
RESET