Before Starting; Operation - Adexa ADM10 Manual De Instrucciones

Before starting:

To ensure safe operation, the unit should be placed on a firm and level surface.

.
Put the device at least 10 cm away from walls and other objects to ensure

correct ventilation.
The device must be connected to a grounded output and the correct voltage

listed on the nameplate. We recommend that you use a socket with leakage
protection switch at least 16A for the power supply. The conductor of the power
cord should be at least 2.5 mm thick. Connect the GND connector firmly to earth.
DO NOT place the unit in a damp area or close to vapor sources.

We recommend that you clean the surface of the device with a soft cloth

moistened with a neutral detergent before first use.
Only install the mixing utensil after checking the direction of rotation with the

mark information. If the direction of rotation is incorrect, damage may occur to the
machine
If the mixing utensil is turning in the wrong direction, disconnect the power and

change the direction ..

Operation:

Avoid contact with moving parts. Keep hands, hair, clothing,
spatulas, and other utensils away from the mixing utensil
damage to the item.
1) Depending on the model, you can choose between three different speed levels
using the gear levers. The number of revolutions to the respective level is next to
the gear lever on the nameplate..
Attention: To ensure a trouble-free and long-lasting function,Never operate the
lever when the machine is still rotating..
Note: If the gear lever can not be folded, turn the drive shaft slightly by hand and
in the direction of rotation. Until the lever can be folded.
Do not knead dough at medium or maximum speed
during the operation to reduce the risk of personal injury and / or
!
4