AOC L47H861 Instrucciones De Funcionamiento página 17

Using Coax (RF)
1. Turn off the power to the HDTV and Set-
Top Box.
2. Using a Coax (RF) cable, connect one end
to the TV OUT (RF) on your Set Top Box
and the other end to the DTV/TV input at
the rear of the HDTV.
3. Turn on the power to the HDTV and Set-
Top Box.
4. Select TV using the INPUT (SOURCE)
button on the remote, side of the HDTV
or directly by pressing the TV button
(below the WIDE button) on the Remote
Control.
NOTE
 Refer to your Set Top Box user manual
for more information about selecting the
video or RF output of the product.
Connecting Your DVD Player
Using HDMI
DVD players that have a digital interface
such as HDMI (High Definition Multimedia
Interface) should be connected to the HDMI
input of the LCD HDTV for optimal results.
Connecting your DVD Player (Best)
1. Turn off the power to the HDTV and DVD
player.
2. Connect a HDMI cable to the HDMI
output of your DVD player and the other
end to the HDMI Input at the rear of the
HDTV.
3. Turn on the power to the HDTV and DVD
player.
4. Select HDMI using the INPUT (SOURCE)
button on the remote, side of the HDTV
or directly by pressing the HDMI button
on the Remote Control.
For DVD Players with DVI:
1. Turn off the HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI
end to your DVD player and the HDMI
end to the HDMI Input at the rear of the
HDTV.
3. Turn on the power to the HDTV and your
DVD player.
4. Select HDMI using the INPUT (SOURCE)
button on the remote or side of the
HDTV, or directly by pressing the HDMI
button on the Remote.
NOTE
 Refer to your DVD player user manual for
more information about the video output
requirements of the product.
 The DVI to HDMI connection provides
video only. Connection to an alternate
audio player is required for audio output.
16