Chamberlain GPS1000 Manual Del Usuario página 6

OPERATION CONTINUED
To inflate an object with the inflation accessory:
1. Tethered to the air hose at the quick-connect locking inflator is a combination fill nozzle and inflation
needle. Remove rubber nozzle adapter to use inflation needle.
2. Insert the fill nozzle/inflation needle into the object to be inflated.
3. Remove the air hose from the retainer on the work light assembly.
4. Press the lever on the quick-connect locking inflator and push over the end of the fill nozzle/inflation
needle.
5. Release the lever to lock onto the fill nozzle/inflation needle. The inflator will immediately turn on.
6. Monitor the pressure using the pressure gauge on the work light assembly.
7. Pull the fill nozzle/inflation needle out of the object when desired pressure is reached.
8. Press the lever on the quick-connect locking inflator and pull the fill nozzle/inflation needle out of
quick-connect locking inflator. The inflator will shut off.
9. Secure the air hose in the retainer.
10. Pull and release the work light assembly, the work light assembly automatically retracts and the Garage
Power Station will shut off.
HOOK
Pull the hook out of the top of the work light assembly and hang at desired location. Before storing, return
the hook to the original position making sure it snaps into place.
TASK LIGHTS
To turn on the task lights, pull the work light assembly down slightly to a position where it does not retract
automatically and release. To turn off the task lights, pull the work light assembly to the fully retracted
position.
To Turn off the task lights, pull the work light assembly and allow it to fully retract back to the Garage
Power Station.
CORD STOP
The cord stop acts as a stop for the retractable work light assembly and activates a switch to turn off the
system. The cord stop can be adjusted to allow the work light assembly to hang at different heights.
Loosen the four screws on the cord stop, slide the cord stop along the cable, then tighten the screws at the
desired position.
6