RiverRidge 06-084 Instrucciones Para El Armado página 7

STEP 5
1. Attach top board (1) to pre-assembled unit by inserting cam bolts (A) into cam lock holes and
inserting wood dowels (C) into wood dowel holes on left side panel (2) and right side panel (3).
2. Insert 4 cam locks (B) into cam lock holes on left side panel (2) and right side panel (3), then rotate
clockwise to secure cam bolts in place.
STEP 6
1. Attach upper back board (11) and middle back board (12) to back of cabinet by inserting 20 screws
(M) through holes on upper back board (11) and middle back board (12) then tighten to back of
cabinet.