Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
2. Line up the mounting template (Z) over the
horizontal line and mark the location of the
mounting bracket holes with a pencil.
3. Drill 5/16" holes for plastic anchors (C) using
5/16" drill bit.
4. Press plastic anchors (C) into the holes until
flush with surface. Use hammer if necessary.
5. Install the mounting brackets (D) with the 2"
wood screws (F).
6. Hang the cabinet (A) and use the Phillips
screwdriver to adjust screws at the top of cabi-
net (A) to level if needed.
7. Align wheels located on back of mirror panel
(E) with glides on top of cabinet (A) and slide
into position.
6
Publicidad
Tabla de contenido
