Important Notes; Connections; Technical Data; Overload Protection - LGB 51095 Guia De Inicio Rapido

2. Important Notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• LGB switched mode power packs may only be used with
products from LGB.

3. Connections

The wiring for a model railroad layout must be done with
wire with a cross section of at least 0.5 square millimeters /
approximately 0.0008 square inches.
Connection to the drive controller or to the digital control
unit with adapter cable No. 60200.
yellow=white
brown=black

4. Technical Data

See the specifications plate on the power pack.
Example:

5. Overload Protection

A built-in overload protection protects the switched mode
power pack from damage in the event of an overload or a
short circuit. The switched mode power pack turns itself off
and waits until the problem has been corrected. Do not try
to run any locomotive or control any turnout as long as the
problem is still present.
7