West Elm Mid-Century Entryway Instrucciones De Cuidado página 4

5. Attach Metal Rod (I) onto the mirror and insert Bolt (F) with Washers (G&H) from mirror back to secure with the
supplied Allen Key. Do not over tighten.
Hold Wood Cleat (D) at desired location. Use a carpenter's level to ensure the wood cleat is level.
6.
With a pencil, mark on wall through the pre‐drilled holes of the wood cleat. These marks will be used
to determine location of the mounting hardware.
Use a Philips head screwdriver, insert a Toggle (K) into the wall at the each marked point. Do not push
7.
the toggle, screw it into the wall like a screw, clockwise until the flange on the end touches the wall.
Align Wood Cleat (D) to the installed toggles and insert Toggle Screw (L) to secure. DO NOT OVER
8.
TIGHTEN SCREWS.
127142 – 07.28.15
mid century entryway mirror
assembly instructions
Page 4 of 5