GINGKO clickclock Manual De Instrucciones página 3

4. Press or button to select your required DAY display number, then press
confirm and the HOUR display number will be flashing
5. Press or button to select your required HOUR display number, then press
confirm and the MINNUTE display number will be flashing
6. Press or button to select your required MINUTE display number, then press
confirm and it will show up 24H display.
7. Press or button to select 24H or 12H format display, then press
exit the setting. When in 12H format display, there will be a dot display on the left top
of the display screen if the clock is in PM time.
1. Press + button to change the temperature format between Celsius and Fahrenheit
when the clock in normal display.
2. Press + button and hold it down to change the date format between DD/MM and MM/DD
1. Press the button to access the alarm setting menu and the display
screen will show
2. To set your alarm time, press and hold down the
change to 0:00. Then press SET button and the alarm hour section will be flashing.
3. Press or button to select your required alarm HOUR, then press
the alarm MINUTE display number will be flashing
4. Press or button to select your required alarm MINUTE, then press
and exit the alarm setting.
5. To turn off the alarm, press and hold down the
go back to
6. To set week day or weekend day alarm setting, press - button to change between 5AL
and 7AL when the clock is in normal display.
The sound activated function can be turned off so the display will stay on
permanently. But having this function turned on saves energy or saves the
batteries life. The clock can also be set to display time only, without alternating
between date and temperature.
1. To turn on/off sound activation function, simply press the '
clock displays '
displays '- -
2. Press and hold the
display only. To turn back to normal display, press and hold down the
until a beep.
which means the alarm is currently off.
to turn it back on, press and hold down this button again.
, it means the sound activation function is on. When clock
, it means the sound activation function is off.
button for 3 seconds until a beep, the Clock will be set on time
button and the display screen will
button and the display will
' button. When
to
to
to
to confirm and
to confirm and
to confirm
button again