Costway ET1382DE Manual Del Usuario página 4

4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate for
which it was designed.
b) Do not(use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the power
tools operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control;
6
g) Use the power tool, accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended could
result in a hazardous situation.
Safety Warnings Specific for Sanding Operations:
Do not use excessively oversized sanding disc paper. Follow
manufacturers recommendations, when selecting sanding paper. Larger
sanding paper extending beyond the sanding pad presents a laceration
hazard and may cause snagging, tearing of
the disc or kickback.
2. Voltage
Before connecting electric tool to the socket, make sure that the supply voltage
be in accordance with rated voltage. If the former is greater than latter and the
device is powered on by mistake, it may result in damage of devices and injuries
of people. As for indefinite supply voltage of socket, never try to plug for use.
Besides, the damage of devices may also occur if the supply voltage falls below
rated voltage.
3. Device Application
As one of our products, the device belongs to the hand-held electric tools.The
device mainly caters for lime surface, including the interior wall, ceiling, exterior
wall, corridor, etc. Remove the painting lime mud from the wall, and make the
surface even or smooth. It may promote the wall grinding efficiency and quality
by workers.With various conditions taken into consideration in the design, the
device may run at high or low speed. In addition, you may adjust the connection
structure at high and low locations respectively, in order to optimize the grinding
efficiency and realize user-friendly and compact design.
7