Customer Service; Requirements For Optimal Performance - Medion MD 90136 Manual De Instrucciones

Customer service

Requirements for optimal performance:


a stable, virus-free computer

a correctly installed operating system

cables correctly attached to the hard disk

regular execution of the Windows
programs to remove sources of error and increase the system
performance.
Defragmenting your hard drive can take some time (several hours
even on a fast PC), and you cannot use your PC during this time. It's
advised that you leave your PC defragmenting over night. To defrag-
ment your drive in Windows XP:
1. Close down all applications and disable your virus scanner if pos-
sible. Also switch off any screensavers.
2. Click Start and then Programs->Accessories->System Tools-
>Disk Defragmenter
3. Select a drive and click Analyze.
4. Defragment if your PC recommends it.
ScanDisk is not present in Windows XP. Instead, use Check Disk. To
start Check Disk:
1. Open My Computer, right-click a drive, and then click Proper-
ties.
2. On the Tools tab, under Error-checking, click Check Now.
Sometimes Defragmenter or Scandisk works on 10% or 30% of a hard
drive and then hangs. This is usually caused by Windows programs
running in the background. If this happens you can force Windows not
to run automatic background programmes. To run ScanDisk/Defrag
successfully:
1. Go to Start->Run and type msconfig in the Open: box.
2. On the General tab, uncheck all items listed under Selective
startup (make sure that Selective startup is selected).
3. Hit apply and OK and restart Windows. This starts Windows with
only the basics running; this insures nothing will interfere with
ScanDisk and Defragmenter.
4. Run ScanDisk and Defrag.
5. Go to Start->Run and type msconfig in the Open: box. Select
Normal Startup.
6. Restart Windows.
®
defragmenter and scandisk
Customer service
ES
EN
DE
IT
EN
ES
PT
DK
11