Optoma OWM3000 Manual De Usuario página 6

Attach the mounting plate to the projector
Hooks are up.
● Loosen the screw on the mount and pre-tighten the projector on the mount.
● If the projector feet on the bottom of the projector prevent the mounting plate sitting flush, then
connecting screw M4( marked as G) should be used.
B. Using mounting arms and universal slots to connect the projector
Firstly, fix the mounting arms on the mounting plate
Mounting arms
or
Hooks are down.
Note: To show a clear picture of how to fix the mounting arms on the mounting plate, the plate is turned
upside down, which means the hooks are down , seen from the view of the above two pictures.
Take off the cap
E
G
Loosen the screw
Hooks are down.
I
K
I
Insert screw (M5x12),
marked as I, into the
hole with thread, and
fix the mounting arms
on the plate.
Insert Nut M5,marked
as K, into the slots of
the mounting arms, and
fix the mounting arms
on the plate.
5