Speaker Connections - Evh 412 Instrucciones De Funcionamiento

Your new EVH® 412 loudspeaker enclosure delivers
big, full tone with the EVH® 5150 III head or other
quality tube amplifiers. Built to Edward Van Halen's
specifications, its features include:
• Premium 5/8" Birch Ply construction for resonant
tone
• Special Design EVH® Brand speakers for full bottom
end and rich highs
• Availible in Ivory or Black coverings.
PART NUMBER:
DRIVERS:
CABINET:
SENSITIVITY:
POWER HANDLING:
IMPEDANCE:
CONNECTIONS:
ENCLOSURE VOLUME:
DIMENSIONS:
WEIGHT:
Product specifications are subject to change without notice.
2
EVH® 412 Loudspeaker Enclosure
Specifications
EVH® 412
2252100000 (Black)
2252100400 (Ivory)
Four 12" (30.5 cm) Special Design EVH® Brand speakers
w/ 1.75" voice coils and 35 oz magnets
0.63" (1.6 cm) birch
102dB, 1 Watt- 1 Meter
100 Watts
16Ω
1/4" high current phone jack
V = 5.5 ft (156 l)
3
B
Height: 29.25 in (74.3 cm)
Width: 30.0 in (76.2 cm)
Depth: 14 in (35.6 cm)
89 lb (40 kg)

SPEAKER CONNECTIONS

Use speaker cable (16-gauge minimum) with standard
1/4" plugs to connect each EVH® enclosure to a 1/4"
speaker output jack on your amplifier.
∆ Caution-Only connect speakers that comply with
your amplifier's minimum impedance and maximum
power output specifications to prevent damage to your
equipment.
∆ Caution- EVH® amplifiers and loudspeaker systems are
capable of producing very high sound pressure levels which
may cause temporary or permanent hearing damage. Use
care when setting and adjusting volume levels during use.