Controls; Battery; Weighing; Measuring With Tare Function - Wilfa KW-4 Manual De Instrucciones

CONTROLS

1. ON - Press this button to switch on when the scale is turned off.
2. OFF – Press this button for 3 seconds to switch off when "0" is visible on the
display.
3. TARE - Press this button to set back the display to "0".
4. UNIT – Press this button to change the units displayed from grams (g) to
ounces (oz) or ounces (oz) to grams (g).

BATTERY

1. The scale work on 2 lithium cell battery (CR2032).
2. Before use, remove the battery compartment cover on the underside of the
scale, place the new batteries with positive (+) and negative (-) side correctly.
3. Replace the battery as soon as "
disposed of at an officially assigned place, for it may pollute the environment.

WEIGHING

1. Press button "ON" to switch it on, and "0g" or "0.00 oz" is displayed.
2. Place the ingredient(s) to be weighed directly on the weighing plate, you can
read the weight right away.
3. Graduation: d=1g, d=0.10oz
4. Overloading display: "EEEE" becomes visible on the display if the weighing
plate has been overburdened.

MEASURING WITH TARE FUNCTION

Tare function allows you to weigh different items consecutively without removing
the items from the scale.
1. When the scale is off, press the ON button to enter the weighing mode.
Start to weigh when "0" is shown on the display.
2. Place the first item you wish to weigh onto the scale, the display will show
the weight of the first item.
3. Press the TARE button to reset the display to zero.
4. Now add another item to weigh onto the scale. The display will show the
weight of the newly added item.
5. If you remove the item added to the scale, the display will return to "0".
If you remove all the items from the scale, the display will show a negative
value indicated by a minus sign.
KITCHEN SCALE · KW-4
" is displayed and ensure that it is
5
EN