Instruction for use
Assembly
1. Clip the two parts of the base together and feed the plug and electrical cord
through the base.
2. Place the tower fan onto the base and align the screw holes on the tower
fan with the holes on the base and secure using 4 screws (provided in the
package)
3. Secure the two ends of the base using 2 screws (provided in the package)
4. Secure the cord grip on the base using the plastic grip and 2 screws
(provided in the package)
Operation Instructions
1. Connect the power plug to a suitable outlet.
2. Select the desired speed by turning the speed switch.
OFF – Power Off
1 – Low Speed
2 – Medium Speed
3 – High Speed
- with oscillation
3. You can set a timer (120 minutes) by turning the timer switch.
Cleaning & Maintenance
Switch off and unplug the appliance from the supply if it is left
unattended and before cleaning, assembling and disassembling.
NEVER immerse the product in water.
Clean with soft cloth.
After using unplug, clean and store safely.
6