Reelcraft CT Serie Instrucciones De Operación

Operating Instructions
Series CT Air/Water Hose Reels
Model Numbers:
CT6050LN CT8050LN
CT6100LN CT8100LN
Specifications:
CT6050LN
Capacity 50' x 3/8"
1/2" Carbon Steel
Reel Inlet
Nickel Plate
Hose Outlet 1/2" Brass NPT
Max Pressure 300 PSI
Read the following precautions and instructions before you begin assembly or use. Keep this literature in a dry place for future reference.
Safety Precautions:
1. Make sure incoming pressure does not exceed maximum working pressure rating of the reel.
2. Use the proper eye protection when assembling and using the hose reel.
3. Assemble the hose reel on a clean workbench free of debris and moisture.
4. Use soap and water when checking for air leaks.
5. Do not expose fingers or hands directly to a pressurized air hose or it will result in bodily injury.
6. Keep children away from the work area.
Unpacking:
When you receive your new reel, it will be mostly assembled. Check to ensure that you have received the following parts:
Description
Swivel Assembly Replacement
Crank Handle
Replacement Clip
Installation:
Note: You must purchase hardware and hose for mounting your new reel. Decide where you wish to mount reel before purchasing as the
hardware needed will vary provided different locations.
1. Match handle to the link lever and attach using handle assembly.
2. Apply teflon tape or pipe compound to swivel valve then thread the valve into the reel.
3. Put the bolts (3/8" or 10mm) through 4 holes in the base of the hose reel and tighten it to ceiling/wall/floor so reel can be fastened
into compressor.
4. Apply teflon tape or thread sealant to reel's built in supply hose fitting. Then attach this supply hose to the outlet of air compressor.
5. Apply teflon tape or thread sealant to hose fitting threads. Attach to the reel swivel valve, then feed the rest of hose through the flange
opening.
6. To avoid damaging the swivel valve, make sure to use an appropriate wrench to stabilize the swivel and hosing tightening the hose
fitting.
Quality Guarantee:
Should this reel fail to perform satisfactorily due to defect or poor workmanship within one year of purchase, return
it to your place of purchase and it will be replaced or repaired free of charge. Incidental or consequential damages
are excluded from this warranty.
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com
CT6050HN
CT6100HN
CT6100LN CT8050LN
100' x 3/8" 50' x 1/2"
1/2" Carbon Steel 1/2" Carbon Steel
Nickel Plate Nickel Plate
1/2" Brass NPT 1/2" Brass NPT
300 PSI 300 PSI
Quantity CT6050LN CT6100LN
1 602708 602708
1 602426 602426
1 262655 262655
CT8100LN CT6050HN
100' x 1/2" 50' x 3/8"
1/2" Carbon Steel 1/2" Stainless
Nickel Plate Steel
1/2" Brass NPT 3/8" Brass NPT
300 PSI 5000 PSI
CT8050LN CT8100LN CT6050HN
602708 602708
602426 602426
262655 262655
CT6100HN
100' x 3/8"
1/2" Stainless
Steel
3/8" Brass NPT
5000 PSI
CT6100HN
602425 602425
602426 602426
262655 262655
Form# 1210-710 Rev: 7/2018