Important Safeguards - Andis LM1 Instrucciones De Uso Y Cuidado

E N G L I S H

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should
always be followed, including the following: Read all
instructions before using the Andis Lather Machine.
DANGER:
To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water.
Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled
into a tub or sink. Do not place in or drop into water or other
liquid.
4. Always unplug this appliance from the electrical outlet
immediately after using.
5. Unplug this appliance before cleaning, removing or assembling
parts.
WARNING:
To reduce the risk of burns, fire,
electric shock, or injury to persons:
1. An appliance should never be left unattended when plugged
in.
2. Close supervision is necessary when this appliance is used by,
on or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by
Andis.
4. Never operate this appliance if it has a damaged cord or plug,
if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to an
Andis Authorized Service Station for examination and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
2
7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
8. To disconnect switch machine OFF then remove plug from
outlet.
9. This machine has a grounded plug. Connect to a properly
grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
GROUNDING INSTRUCTIONS
This machine has a grounded plug. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire
for the electric current. This appliance is equipped with a cord having a
grounding wire with an appropriate grounding plug. The plug must be
plugged into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER:
Improper use of the grounding plug can result in a
risk of electric shock. If repair or replacement of the cord or plug is
necessary, do not connect the grounding wire to either flat-blade terminal.
The wire with insulation having an outer surface that is green with or without
yellow stripes is the grounding wire. Check with a qualified electrician or
serviceman if the grounding instructions are not completely understood, or
if in doubt as to whether the appliance is properly grounded. Do not modify
the plug provided; if it will not fit the outlet, have the proper outlet installed
by a qualified electrician. This appliance is for use on a nominal 120-volt
circuit, and has a grounding plug (Figure A). A temporary adapter (Figures B
& C) may be used to connect this plug to a 2-pole receptacle (Figure B) if a
Grounded
Outlet
Grounded
Grounded
Outlet
Outlet
Metallic
Screw
Metallic
Metallic
Screw
Screw
Grounded
Pin
Grounded
Grounded
Grounded
Pin
Outlet Box
Pin Grounded
Grounded
Outlet Box
Outlet Box
FIGURE A
Adapter
Adapter
Adapter
Adapter
Adapter
Adapter
2-Pole
Receptacle Grounding Screw
2-Pole Tab for
2-Pole
Receptacle Grounding Screw
Receptacle Grounding Screw
FIGURE B FIGURE C
Tab for
Tab for
3