Troubleshooting - EarthWise LM71313 El Manual Del Propietario

Problem
The motor does not run
The material to be shredded
is not pulled in.
Cutting line becomes worn.
Call us first with questions about operating or maintaining your product at 1-800-633-1501
between 8:00 a.m. – 5:00 p.m. Eastern Standard Time, or get assistance on www.americanlawnmower.com.
TROUBLE SHOOTING
Possible cause
Power failure / unit not
plugged into a working
receptacle.
The material is jammed in
the feed inlet.
The cutting line is tangled.
CALL US FIRST !!
14
Model LM71313
Possible correction
Check to make sure unit is plugged into a
working outlet. Make sure extension cord is
not damaged.
Disconnect the power supply and unplug
the funnel handle. Pull the material from the
feed inlet. Replace the funnel handle.
Disconnect the power supply. Expose the
spinning head. Unwrap the tangled lines.
Disconnecting the unit from the power
supply. Replace with new line.