Steren LCD-710 Manual De Instrucciones página 8

6.- Antenna box:
allows you to connect an external antenna and the car lighter
adapter.
To start to use the monitor, follow these steps:
1.- Turn the equipment on.
2.- Use the Channel buttons to select the desired channel.
3.- Set the volume levels.
OPERATION MENU
Press Menu button to enter to submenus: Picture, System,
Option, Clock, Preset.
Picture
With this option can modify the contrast, brightness, color and
sharp of the image on the LCD screen.
To choose the desired option to modify, use Channel buttons,
using the remote control or pressing in the frontal panel of the
LCD screen.
To modify the selection, use Volume buttons (Vol).
When select the NTSC video format, you can modify the Tint When select the NTSC video format, you can modify the Tint
option, too. option, too.
System
Allow one to set this parameters:
Input: Switch between TV signal or Video signal
Video format: Switch between PAL, SECAM, NTSC,
N3.58 or N4.43 video standard format. We recommend
to use the option: AUTO
Blue back: Activate or deactivate the back color when
there are not signal
With this submenu you can modify the picture size: 4:3;
and 16:9
To choose the desired option to modify, use Channel buttons
To modify the selection, use Volume buttons (Vol).
Press Power (1) button to exit from the game mode.
ENGLISH-8