What's In The Box; Assembly; Installing The Wall Mount & Tool Storage Station - Bissell 2897 Serie Manual Del Usuario

What's in the Box?

Standard accessories may vary by model. To identify what should be included with your purchase,
please refer to the "Carton Contents" list located on the underside of the insert inside the carton.
Hand Vacuum Extension Wand

Assembly

Go to support.BISSELL.com for assembly videos.
1.
Connect the Extension Wand
to Motorized Floor Cleaning
Foot. You'll hear a "click" when
they're connected.
Installing the Wall Mount & Tool Storage Station
Go to support.BISSELL.com for more tips and video instructions.
1.
Insert tool holder on the
side of the wall mount.
Foot Pet TurboEraser®
2.
Connect the Hand Vacuum
to the Extension Wand. You'll
hear a "click" when they're
connected.
2.
Screw the wall mount into
a wall. Ensure the mount is
high enough up off the ground
for the vacuum to hang
comfortably. Screwing into
a wall stud will provide best
support.
Crevice Tool
Tool
3.
Wrap cord on the side of
the product where the cord
clips are located.
3.
Hang the vacuum on the
center storage piece and
insert tools on the tool holder
provided.
Wall Mount &
Tool Storage
Station
BISSELL.com 3