MAINTENANCE & REPAIR INSTRUCTIONS
CLEANING
WARNING: To avoid serious personal injury,
always turn your trimmer off and allow it to cool
before you clean or service it.
Switch off the unit and disconnect it from the power source.
Use a small brush to clean off the outside of the unit. Do not
use strong detergents. Household cleaners that contain
aromatic oils such as pine and lemon, and solvents such as
kerosene, can damage plastic housing or handle. Wipe off
any moisture with a soft cloth. Also keep the air vents free of
obstructions.
INSPECT EXTENSION CORDS
Inspect all extension cords. Look closely for deterioration,
cuts or cracks in the insulation. Inspect the connectors for
damage. Replace a damaged or defective cord.
MOTOR
Motor type....................................................................................................................................................................................A.C.,120 Volts Electric
Operating RPM ..................................................................................................................................................................................... up to 7,400 rpm
Ignition Switch........................................................................................................................................................................................................ Trigger
Amperage............................................................................................................................................................................................................. 4.7 amps
DRIVE SHAFT AND CUTTING HEAD
Drive Shaft Housing........................................................................................................................................................................................Aluminum
Shoulder Strap .................................................................................................................................................................................................... Optional
Unit Weight (cutting attachment shield and D-handle) ...............................................................................................................9 lbs. (4.1 kg)
Line Spool ....................................................................................................................................................................................... Bump Line Releaser
Line Spool Diameter ......................................................................................................................................................................3 inches (76.2 mm)
Cutting Path Diameter......................................................................................................................................................................... 15 in (381 mm)
Trimming Line Diameter .............................................................................................................................................................. 0.065 in (1.65 mm)
STORAGE
• Allow the unit to cool before storing.
• Lock the unit to prevent unauthorized use or damage.
• Store the unit in a dry, well-ventilated area.
• Store the unit out of the reach of children.
ACCESSORIES/REPLACEMENT PARTS
Replacement Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160425
Replacement Line Cartridge . . . . . . . . . . . . . . . . . . . . . . . . 160425
Inner Reel Spring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610317
Bump Knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153066
Bump Knob Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147153
These replacement parts can be purchased from your local
authorized dealer.
SPECIFICATIONS
12