Use Of The Unit - Lagrange Hemisphere Manual Del Usuario

STARTING AND USE
BEFORE THE ST USE
1
Fill the unit with water up to the maximum level ("MAX").
*
Turn on the unit as described in the section "use of the unit". Let the
*
water boil.
Pour out the water once it has boiled.
*
Repeat the operation a second time.
*
The unit is ready for use.
*

USE OF THE UNIT

Open the cover using the handle. Be careful not to open the
*
cover when the water is hot. Let the kettle cool first in order
to avoid burning due to the release of steam.
Fill the unit with water up to the desired level, observing the level
*
requirements ( . L MIN to
0 5
Close the cover and make sure that it is properly locked in place.
*
Put the kettle on its base.
*
Turn the unit on by plugging in the power cord. The kettle will make
*
a sound and the buttons and the water level indicator will light up
briefly. The screen will then light up to display the water temperature.
If the temperature of the water is below
"Lo" which means low temperature.
VARIOUS FUNCTIONALITIES
Boiling water:
*
Press the °C button. The
100
indicator go on.
The water will start to warm up.
As soon as the boiling begins, the kettle will ring
off automatically. The
will go off.
The water temperature will then be displayed on the screen.
This mode can be cancelled by simply pressing the
With this mode, you can monitor the progress of the heating, and
the water level indicator is lit up with colors that are more or less
hot depending on the temperature of the water.
Boil water with prolongation of boiling:
*
The boiling prolongation mode lets you purify the water by removing
most of the micro-organisms and bacteria present in the water and
it also removes the taste of chlorine.
Press the "PURE" button. The "PURE" button and the water level
indicator go on.
46 46
. L MAX).
1 5
°C, the screen will display
40
°C button and the water level
100
times and go
5
°C button and the water level indicator
100
100
°C button.