Evolve ShowerStart TSV3 Manual De Instrucciones

evolve
™
ShowerStart
MORE HOT WATER - MORE CONVENIENCE - MORE FREEDOM
INSTALLATION
no tools - hand tighten only
1.
If no gasket is present inside
shower head, stretch
plumber's tape over the
exposed threads on the
TSV before hand tightening
together.
3.
Hand tighten ShowerStart
TSV clockwise onto the
shower pipe, ending in the
preferred position. Do not
force orientation; add
addtional tape if necessary.
CONTENTS
ShowerStart TSV
3
Pull cord
Plumber's tape
WARRANTY
3 Year Limited Lifetime Warranty
Warranty claims: 480-496-2294
www.thinkevolve.com
Evolve Technologies warrants this product to be free from defects in
materials and workmanship for a period of three years from the date of
purchase. This warranty is limited to repairing or replacing, at Evolve
Technologies' sole option, any such defective products. To obtain service
under warranty you must obtain a Return Material Authorization (RMA)
number from an Evolve Technologies representative. The product must be
returned with transportation charges prepaid and must be accompanied by
a brief description of the problem encountered and proof of date and place
of purchase. This warranty does not apply to equipment which has been
damaged by accident, negligence, or misapplication or has been altered or
modified in any way. This warranty applies to the original purchaser. EXCEPT
AS PROVIDED HEREIN, Evolve Technologies MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
countries do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser. EXCEPT AS PROVIDED ABOVE, IN NO EVENT SHALL Evolve
Technologies BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, Evolve Technologies is not liable for any costs, such as lost
products or revenue, loss of equipment, loss of use of equipment, costs of
substitutes, claims by third parties, or otherwise. This warranty gives you
specific legal rights and you may also have other rights which may vary from
location to location.
©2019 Evolve Technologies LLC. All rights reserved.
Patent http://www.thinkevolve.com/patents
Other U.S. and Foreign Patents Pending.
Designed and assembled in USA. Rev-0319
TSV
®
2.
Stretch plumber's tape in a
clockwise direction tightly
around the pipe threads 2-4
wraps to create a solid seal
to prevent water leakage.
4.
Attach the pull cord by
slipping it over and onto the
hook on the TSV toggle. Do
this in a direction that results
in the graphic facing the
bather.
HOW SHOWERSTART WORKS
1. Turn on shower
Cold water exits.
2. ShowerStart® kicks in
When water gets hot,
flow reduces to a trickle.
3. Ready when you are
Pull cord to begin showering.
TROUBLE SHOOTING
If the showerhead won't resume normal flow...
1. Try pulling the cord. The water may have already been
warm or someone may have recently taken a shower. Either
of these events may place the shower head in trickle mode.
2. A washer from your previous showerhead
may be blocking the water's flow. Remove the
shower head and check the valve by inspecting
the end that connects to the shower pipe. If the
valve is clear, you will see a mesh screen
around a copper stem. If the valve is blocked,
remove the obstruction and re-install the
shower head.
3. Your static water pressure may be below 30 psi. This can
happen in homes that have lower water pressures or if you
are on a well. The shower head requires static water pressure
of at least 30 psi to function properly.
MAXIMIZE YOUR SAVINGS
• Rotate shower's faucet to the hottest setting available
when turning on the shower. This allows the shower to
become warm in the shortest period of time.
• Return to the shower as soon as possible once the
trickle begins.
showerstart.com
IMPORTANT SAFETY INFORMATION:
ShowerStart TSV is NOT an anti-scald device.
- Lower water heater temperature to prevent scalding accidents.
Water temperatures above 120° F can cause severe burns or even death.
- Always resume water flow and check water temperature before entering shower.
- Not designed for use with tankless hot water heaters.
H C
PULL
clear valve
no blockage