Manual Time Setting; Alarm Setting - BEARWARE 303162 Manual

Once the daylight saving time (DST) is received, a "DST" symbol appears in the
display.
Only the " Snooze/Light" and "Wave" are functional during the search process.
The other buttons are disabled during this time.

6.2 Manual time setting

Press and hold the "TIME/SET" button for about 2 seconds in time mode. The
value to be set starts flashing. The values can be set using the "UP" button and
confirmed using the "TIME/SET" button. The setting sequence is as follows:
12 or 24 hours-time zone (-12 to +12 hours) – Hour – Minutes – Year – Month –
Day – Language (in which the weekday is to be displayed).
The following languages can be selected:
German (GER), Italian (ITA), French (FRE), Dutch (DUT), Spanish (SPA), Danish
(DAN) and English (ENG)
If a button is not pressed within 30 seconds, then the device switches back to the
home screen.

6.3 Alarm setting

Press the "ALM/SET" button in time mode to show the alarm time. While the
alarm time is displayed, press the „UP" button to activate the alarm. The alarm
symbol ( ) appears at the top right of the display when the alarm is activa-
ted.
Press and hold the "ALM/SET" button for about 2 seconds to access the alarm set-
tings. The settings can be adjusted using the "UP" button. Confirm the respective
setting using the "ALM/SET" button. The setting sequence is as follows:
Hour - Minute
The alarm symbol on the display starts flashing once the audible alarm is heard.
The audible alarm has several levels:
0-10 seconds alarm: 1 beep
10-20 seconds alarm: 2 beeps
20-30 seconds alarm: 3 beeps
12
English