Steren BAF-510 Manual De Instrucciones página 8

13.- INDICATORS
These LED indicators will light red when there is a high level
audio signal at the indicated frequency. These can be used to
detect an audio feedback frequency and then lower the
appropriate EQ fader to remove the unwanted feedback.
14.- AUX RCA OUTPUTS
The Left and Right RCA outputs provide line level signal
output to a cassette deck, home audio equipment, or a recording
device.
15.- L/MONITOR and R/MAIN MASTER VOLUME
These control the fi nal level of the signal sent to the left and right
speaker outputs and the aux RCA outputs.
16
18 17 19
16.- FUSE HOLDER & POWER CORD CONNECTOR
The cord connector is used to connect the AC power source to
your power amplifi er.
This fuse holder contains an AC primary fuse. When this fuse
blows, replace it with the same type fuse, size and power rating.
If it continuously blows, stop replacing the fuse and refer
servicing to qualifi ed personnel.
17.- AC VOLTAGE SELECT SWITCH
Before plugging in the power cord, check to see that the unit is
set for the proper voltage for your area.
ENGLISH-8