Publicidad
Model #
960KFSI
SIENNA FINISH
Somerset
Bench 60"
Assembly Instructions
Your piece of GardenWood furniture has been finished
at the factory with a tinted, penetrating oil that contains
both UV and anti-fungal inhibitors. For best results, es-
pecially in extreme climates, another coat of protective oil
is recommended before using for the first time. A surface
coating is vital for the protection of your furniture. Treat-
ment should be applied at least once or twice a year.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of GardenWood Furniture
completely before beginning.
Inspect your furniture periodically for any loose
glue joints or screws, or any other problem which
may be affecting the stability of your furniture.
Tighten or repair as needed
Production Code / Code produit / Código del producto:
We will replace any
Rev. 10/05
Publicidad
Tabla de contenido
Manuales relacionados para Whittier Wood Products GardenWood 960KFSI
Resumen de contenidos para Whittier Wood Products GardenWood 960KFSI
- Página 1 Service Policy: We will replace any parts which are defective, missing or Bench 60" damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or Assembly Instructions email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
- Página 2 960KFSI Somerset Bench – Parts List Before beginning assembly, check that the quantities of the parts received match those on the parts list below. 2 – Right Leg Assembly – Qty. 1 3 – Back – Qty. 1 1 – Left Leg Assembly –...
-
Página 3: Tools Required
960KFSI Somerset Bench ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Outdoor Wood Glue FIG. 1 1) Glue three 10x40mm Wood Dowels (C) into the upper holes in the Left Leg Assem- bly (1) and one 8x30mm Wood Dowel (D) in each end of Seat Brace (6) as shown in FIGURE 1. -
Página 4: Acabado Sienna
Modelo # 960KFSI ACABADO SIENNA Banco Somerset - 60" Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con Instrucciones para Armar el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, LISTA DE PIEZAS correo o e-mail) para obtener piezas de repuesto. -
Página 5: Outils Nécessaires
No. de modèle 960KFSI FINI SIENNA Banc Somerset - 60" Politique de service : Nous remplacerons toutes les pièces défectueuses, manquantes ou Instructions de Montage endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement. -
Página 6: General Maintenance
Presented by Whittier Wood Products In order to maintain the appearance and life of this GardenWood Furniture™ product, please follow these instructions. Finishing Tips A surface coating is vital for the protection of your furniture. Treatment should be applied at least once or twice a year.