IKEA FÖRNUFTIG Manual De Instrucciones página 5

Filter replacement
When replacing the filter it is essential that the user
proceeds as follows:
A LED on the top indicates a filter that needs to be
replaced.
Warning!
The power supply cord must be disconnected
during filter replacement!
1. Disconnect the power and wait until the fan has
stopped.
2. Remove the pre-filter by the pull-tag. Clean the
pre-filer with a vacuum cleaner or with water
depending on the level of contamination.
3. Remove filter(s), and handle used filters carefully,
dispose the filter in accordance with local
environmental regulations in your country.
4. Clean inside, removing all dust and dirt.
5. Insert the new filter(s). (Do not touch the carbon
filter.)
6. Reconnect the power supply cord.
7. When you have replaced a filter, press and
hold the RESET button for 5 second. The reset
initializes the filter replacement cycle counter.
8. Attach the pre-filter.
Run modes with HEPA-filter (with Carbon filter)
Noise
Level
(Spl)
I 28dB(A)
II 49dB(A)
III 60dB(A)
Save these instructions or future use.
CADR Power
30 m³/h 1.5W
(25 m³/h) (1.4W)
90 m³/h 6.5W
(80 m³/h) (5.5W)
140 m³/h 16W
(120 m³/h) (14W)
Technical specifications
Model: FÖRNUFTIG Air purifier
Type: E1916
Input: 24V DC, 0.8 A, 19W
Dimensions: 461 x 310 x 109 mm
Weight: 2.66 kg (3.05 kg)
Filter: HEPA filter, Carbon-filter
Optional: Carbon-filter
Technical data PSU
Type: ICPSW24-19-1
ICPSW24-19-1A
Input: 100-240 VAC, 50/60 Hz, 0.4A
Output: 24.0V DC, 0.8 A, Max 19.0W
Average active efficiency: 88.6 %
Efficiency at low load (10 %): 82.3 %
No load power consumption: 0.08 W
Indoor use only
Manufacturer: IKEA of Sweden AB
(commercial registration number: 556074-7551)
Address: Box 702, SE-343 81 Älmhult, SWEDEN
The crossed-out wheeled bin symbol indicates that
the item should be disposed of separately from
household waste. The item should be handed in for
recycling in accordance with local environmental
regulations for waste disposal. By separating a
marked item from household waste, you will help
reduce the volume of waste sent to incinerators
or land-fill and minimize any potential negative
impact on human health and the environment. For
more information, please contact your IKEA store.
Filter cleaning and replacement cycles
Filter cycles
Every 2~4
Pre-filter
weeks
HEPA filter Every 6 months
Carbon filter Every 6 months
* The recommended filter replacement cycles may
differ depending on the operating environment.
5
method
Cleaning
Replacement
Replacement