CARE AND MAINTENANCE
USER SERVICING INSTRUCTIONS
To Replace the Fuse
1)
Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2) Open fuse cover.
attachment plug toward blades.
3)
Remove fuse carefully. Turn plug over to remove fuse.
4)
Risk of fire. Replace fuse only with 3-amp, 125-volt fuse
(provided with product).
Close fuse cover.
5)
CAUTION: Risk of fire. Do not replace attachment plug. Do not remove the safety device (fuse).
Discard product if the attachment plug is damaged.
Replacing Bulbs from Lamp Holders:
1) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on cord.
2) Pull lamp and plastic base straight out of lamp holder.
3) Replace lamp with only 12 volt, 0.84-watt super bright type lamp (provided with product).
To reduce the risk of overheating, replace burned-out lamps promptly. Use 12 volt,
CAUTION:
0.84-watt lamps only.
:
Slide open fuse access cover on top of
Slide closed the fuse access cover on top of attachment plug.
5