Aux; Listening To An External Source - Philips BTM177 Manual De Usuario

AUX

Listening to an external source

You can listen to the sound of the connected
external device through your system's speakers.
Using AUX IN (3.5 mm jack )
1
Use a cinch cable (not supplied) to connect
AUX IN jack of the main unit (3.5 mm, located
on the back panel) to an AUDIO OUT or
headphone jack on an external equipment (such
as CD player, or VCR).
2
Press SOURCE (or AUX on the remote
control) repeatedly until "AUX 1" is displayed.
Using AUX IN 2 (white/red jacks)
1
Use the audio cables (white/red, not supplied) to
connect AUX IN 2 (L/R) jacks of the main unit
(located on the back panel ) to the
corresponding AUDIO OUT jacks on an
external device (such as TV or VCR).
2
Press SOURCE (or AUX on the remote
control) repeatedly until "AUX 2" is displayed.
Note:
– To connect equipment with two AUX OUT (left/
right) terminals, you can use a "single to double"
cinch cable (not supplied).
70