Using Ac Power; Lullaby Function; Talkback Function - Nannio Eye Manual Del Usuario

Using AC Power

1. Plug one end of the provided power adapter into a wall outlet and the other end
into the monitor (See Fig. 6).
Note : Use the adapter labeled OUTPUT: 6V DC with the monitor.
2. Press the POWER button
on(See Fig. 6).
Note 1: When charging starts or power on the monitor, "Power/Charging" LED
Note 2: "Out of Range" will be displayed on the LCD screen if the monitor
2
Volume Setting
.2
Press the volume selection button
press the Zoom/OK button
2
Brightness Setting
.3
Press the brightness selection button
then press the Zoom/OK button
2
Zoom in Function
.4
Press the Zoom/OK button
again to change back to normal view (See Fig. 9).
2
VOX ( Voice-Operated Transmission) Function
.5
1. Press the VOX button
but VOX LED
2. When the sound from the camera reaches the setting level (See Fig. 18), the
screen will turn ON automatically. It will turn OFF again after 30 seconds. If
the sound from the camera still reaches the setting level during the 30 seconds,
it will extend 30 seconds to turn OFF the screen from the last voice event.
2

Lullaby Function

.6
There are three lullabies that can be selected to play on the camera unit for your
baby.
1. Press the music button
2. Press the music button
2
.7

Talkback Function

Press the talkback button
will then be displayed on the screen (See Fig. 12).
will light up (green light).
exceeds the range (unlink).
will remain ON (green) (See Fig. 10).
and keep it around 3 seconds to turn the monitor
& to adjust volume level, and then
to confirm the setting (See Fig. 7).
&
to confirm the setting(See Fig. 8).
on monitor once for a 2X zoom of image and press
on the monitor unit. This will turn off the screen
, the camera will play music(See Fig. 11).
again, the camera will play the next song.
to speak through the camera unit, and the
to adjust brightness level, and
icon
3