Thermador Pro Harmony PAALTKITHW Instrucciones De Instalación página 13

Removing the kick and front panels
1. Remove the kick panel screws using a T-20 torx
screwdriver.
2. Remove the front panel screws using a T-20 torx
screwdriver.
Changing the bake burner orifice
To change the bake burner orifice
1. Remove the bake gas line using a 13/16'' box end
wrench, while restraining the elbow fitting from
rotation using an adjustable wrench.
IMPORTANT: DO NOT bend the bake burner tube or
shutter. Ensure that the bake orifice is aligned to the
center of the burner tube inlet.
2. Hand twist the orifice elbow (a) while restraining the
bake orifice (b) from rotation using an adjustable
wrench.
a. Orifice elbow
b. Bake orifice
3. Replace the orifices as indicated in the table and
reattach the gas line.
36'' and 48'' Pro Harmony
(PRGxxxWxH)
Main oven bake burner only
48'' Pro Grand (PRG48xWxG)
Auxiliary oven bake burner only 1.85 mm (185)
4. Perform a gas leak check of the orifice and associated
supply tube fittings, per the "Check for gas leaks"
section of these instructions.
NOTE: The replacement bake orifices have straight
threads (not tapered threads) and DO NOT require thread
sealing compound.
b
a
Orifice no.
2.06 mm (206)
Orifice no.
Page. 13