Opening The Door Using A Door Code - urmet domus alpha IPerCom 1168/1 Manual Del Usuario

3.7.3
If the conversation is paused by the switchboard operator, the display shown on
the side will appear on the display.
If you want to interrupt the call, press the corresponding button icon

3.8 OPENING THE DOOR USING A DOOR CODE

3.8.1
The Homepage appears on the display when any button on the call module is pressed
or after the user approaches the call station as indicated by the presence sensor
(optional).
3.8.2
The page shown by the side will appear after pressing the button next to icon
or the button on the keypad Ref. 1168/46. The screen shown on the side
refers to a system where both gates are available.
If there is only one gate in the system, the screen will only show the indication
of the available gate.
Pressing the shortcut button next to the
3.8.3
Then, enter the door opener code on the keypad.
If you make a mistake while typing, you can delete the wrong character using the
button in the shortcut menu or by pressing "X" on the keypad.
Press the shortcut button next to the
one next to the icon to open the door.
The screen shown on the side refers to a system where both gates are available.
If there is only one gate in the system, the screen will only show the indication
of the available gate.
DS1168-033
icon to go back to the Home Page.
icon to open the gate. Similarly, press the
.
1