Speedaire 1VW38 Manual De Instrucciones De Operación Y Lista De Partes

Operating Instructions & Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Speedaire
ASME Code
Air Receivers
Description
Speedaire ASME code air receivers can be used as replacement tanks for electric
air compressors or as a supply for compressed air. These tanks are not to be used
with gasoline engines, except model 1VW38. Models 3Z409B, 2Z623C and 2Z624D
include mounting slots to accept a new or replacement compressor pump and
motor assembly. Models 4TK09 and 4TK10 have a carry handle or can be mounted
as a stationary compressed air source.
Safety Guidelines
This manual contains information
that is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates an
imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates a
potentially
hazardous situation which, if not
avoided, could result in death or serious
injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
Specifications
Air Receiver
Model Size
2Z623C 7-1/2 gal
2Z624D 11
3Z409B 20
1VW38 20
4TK09 13
4TK10 20
Form 5S5992
1VW38, 2Z623C, 2Z624D, 3Z409B, 4tK09 and 4tK10
®
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service.
shipping, handling or use. Damage may
result in bursting and cause injury or
property damage.
General Safety Information
CALIFORNIA PROPOSItION 65
sand, drill or grind materials such as
wood, paint, metal, concrete, cement, or
other masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.
contain chemicals known to the State
of California to cause cancer and birth
defects or other reproductive harm.
Wash hands after handling.
Maximum
Compressor
type And Motor HP
Portable 1-1/2 HP
Portable 2
Portable 3
Portable 3
Carry N/A
Carry N/A
Printed in U.S.A.
02433
Version 4
GENERAL SAFEty
Since the air compressor and other
components (material pump, spray
guns, filters, lubricators, hoses, etc.)
used, make up a high pressure pumping
system, the following safety precautions
must be observed at all times:
1. Read all manuals
2. Follow all local electrical and safety
Do not operate unit
if damaged during
Never operate compressor
You can create
without a beltguard. Units
dust when you cut,
can start automatically
without warning. Personal
injury or property damage could occur
from contact with moving parts.
3. To reduce fire hazard, keep unit free
This product or
its power cord may
any component in the system.
Maximum
Working Maximum Gas
Pressure Engine HP
125 psi None
125 None
144 None
150 5.5
140 None
144 None
IN197403AV 12/12
For Warranty & Service
1-888-606-5587
For Repair Parts
1-800-323-0620
Do Not Return To Branch
included with this
product carefully. Be
thoroughly familiar
with the controls and
the proper use of the equipment.
codes as well as the United States
National Electrical Codes (NEC) and
Occupational Safety and Health Act
(OSHA).
of oil, solvent, excessive grease and
flammable materials.
Do not exceed the
pressure rating of
Port Size
1/2" NPT, 1/4" NPT, 1/4" NPT
Drain port
Two 1/2" NPT, 1/4" NPT Drain
port, 1/4" NPT Safety valve
E
N
G
L
I
S
H
MANUAL
E
S
P
A
Ñ
O
L
F
R
A
N
Ç
A
I
S